Tip:
Highlight text to annotate it
X
CamShelving is not only strong and stable, but is easy to assemble and adjust. Let’s
take a closer look at the assembly process. Start by installing a top and bottom post
connector onto a pair of posts and repeat for the second post kit. To install the traverses,
align the traverse onto the dovetail on the post and slide down in one easy set. The traverses
slide right on. Lightly tap the traverse into final position with a mallet and place shelf
plates along the traverses. Always check that unit is level and adjust the leveling foot
if needed. Add-on units are as simple as connecting the post kit to the built unit. The add-on
units share the middle post and shelf heights can be set in between. Or use corner connectors
to attach a unit in a corner. This offers an open area to fully use the shelving place.
To adjust shelves, simply remove the traverse and slide it on to the desired dovetail. Shelves
can be adjusted into four inch, one hundred millimeter increments. CamShelving helps operators
easily maximize their storage space. This provides flexibility and allows adjustments
as inventory fluctuates. Unlike other shelving units, which require the unit to be completely
dismantled just to adjust one shelf.