Tip:
Highlight text to annotate it
X
Does your
6.0 liter Ford power stroke engine exhibit white smoke
black smoke or lack power. Is it surging
has an exhaust odor or setting EGR diagnostic trouble codes
these drivability issues and trouble codes
most likely are the result of excessive coking deposits in the EGR valve
or the passage ways. The result of the coking
is that the EGR valve sticks or even worse when build-up is severe
can cause a no flow are insufficient EGR flow condition. Remanufactured in the
USA
Cardone EGR valves feature new O.E. style
high-temperature O-rings and mounting gaskets for prolonged product life
each unit is functionally tested and the body of the valve is
painted to ensure the unit is protected for years of use on the vehicle
before changing your EGR valve take a moment to watch our installation process
to get the best possible performance from the EGR system
and to protect the replacement EGR Valve we suggest performing
a complete EGR system flush. Completely cleaning the system
and not just the bore of the EGR valve will ensure proper operation
of the replacement valve and allow the best possible performance
of the EGR system. Remove the EGR valve
as per the vehicle manufacturer's instructions. Carefully clean the
mounting surface
the EGR valve bore and passages, removing
all soot and carbon. Lightly lubricate the EGR valve O-rings with clean engine oil
install the EGR valve using the supplied gasket
following the vehicle manufacturer's instructions and tightening specs
following these instructions should help your installation run smoothly
thanks for watching this cardone industries product spotlight