Tip:
Highlight text to annotate it
X
Hi my name is Fred Carson I'm from Carson's saw shop in Eugene, Oregon. And I have been
sharpening tools for over 30 years and I am here with Expert Village. Okay, this is hand
push lawn mower. Don't need a motor to run it, each tire has a little gear inside of
here and it turns and rolls on your lawn and it has a gear in there that turns the reel
and we have to disassemble this to sharpen it. I need to sharpen it right here and it
has a bed knife right here. I've got my special sharpener to pop this off and it pops that
clip right off like so. And take your wheel off and there's your gear. And this is the
little paul that goes into the gear and runs the reel, you take all that out and do the
same thing over here. And this is your roller back here with a have inch wrench.
Your roller is your height adjustment with your different blades of grass. I'm gonna
need some WD-40. Sometimes these screws are pretty hard to take apart. This is your bed
knife right there it's pretty nasty looking. This is a bed knife this needs to be sharpened,
and base on the edge too so that it has a square edge to be sharpened and we'll get
to that in just a second.