Tip:
Highlight text to annotate it
X
Today on this 2012 Chrysler Town and Country were going to install a hidden hitch part
#: 87451. This will be comparable to the draw type hitch part #: 75579. Here are a couple
of measurements that will assist you in selecting accessories for your new hitch. from the center
of the hitch pinhole to the outermost point of the bumper is 6 inches. From the top of
the receiver tube to the ground is 11 and inches. Now lets go ahead with the installation.
Before we can install our hitch, well first need to lower the vehicle exhaust. Were going
to remove the rear two most hangers and the easiest way to do this is just to remove the
fasteners that hold them to the frame. With our exhaust lowered down we need to go ahead
and remove the fasteners that are already in the frame. Here on the driver side we will
remove the 3 rearmost fasteners. On the passenger side we will just be removing the two rearmost
fasteners.