Tip:
Highlight text to annotate it
X
Today on our 2012 Honda Civic, we'll be installing the Tow Ready T1 Connector, part number 118420.
First, we'll need to open up the rear cargo access then we'll remove the spare tire cover.
There is one plastic fastener that will need to be removed before we can take it out of
the vehicle. We'll simply set this aside for reinstallation later. Next, we'll remove the
rear threshold. Again, we'll set this aside for the installation later.
Now we'll need to remove the carpeting behind both taillight assemblies. On each side, there
are three plastic fasteners that'll need to be removed. Simply take a flat bladed screw
driver and pry up on the center of the push pin and then remove it. Now with the carpeting
out of the way, we can go ahead and start making connections with
our new T1 connector. First, take the yellow wire connector, plug in line with the driver's side manufacturer's wiring.