Tip:
Highlight text to annotate it
X
thank you for purchasing the lippert components level of automatic leveling
system
for a comprehensive understanding of the level of automatic leveling system
please read your owner's manual before operation
park the unit on a reasonably level and solid surface and clear all jack landing
locations of debris and obstructions
make sure all persons pets and property are clear of the coach while system is
operating
when park in the unit on extremely soft surfaces utilize load distribution pads
under each jack operating your l_c_i_ level up
dropping coach off and i'm hoping
first pushed touch panel on off to turn system on
the l_c_d_ screen will light up and will display not level jack up
push and hold the front button to extend the front landing gear jacks
this lets the front of fifth wheel while taking the weight of the fifth wheel off
of the hitch
un couple all fifth wheel connections on the two vehicle
note if orange era lights come on doing this procedure
this is an indication that the current disposition of the unit needs to be set
above level
in this case the front of the unit is too low
pull till vehicle away and park at a safe distance
operating your l_c_i_ level up
on a leveling the coach
make sure the control panel is still on and push the auto level button on the
control panel
the front of the unit will lower to activate the leveling sensor
the six leveling jacks will level the coach front to rear
and then level the coach side to side
there will be several leveling checks from the system during this time
when on a level is complete the l_c_d_ indicates ready
jack's down and the green light in the middle of the jack buttons will light
push on off button to turn system off or system will timeout and shut off
automatically
operating your l_c_i_ level up
reconnecting the coach
read your specific r_v_ owner's manual for accurate hookup procedures
be sure the main power switch is on
l_c_d_ display will indicate ready checks down
push left and write buttons at the same time
the reheat auto memory function will rise the unit to the original starting
point
connects to a vehicle and make sure the fifth wheel impugn is connected and
locked
push up he wrote twice
auto retract should appear on l_c_d_ screen
pushed enter system will automatically retract all jacks