Tip:
Highlight text to annotate it
X
Hallo and hello! For english subtitles click on CC here!
Okay, today my armor tutorial or better armor fixation tutorial
is about how to fixate things like this, or that, to your
clothing. Or how to fixate an entire armor like this one.
First, I have to change clothing and then I will show you how it's done!
At first I'm gonna show you how I fixated the shoulders on my druid T9.
For fixation I have this vest on. I'm gonna take it off, to show you how it's done.
Our most important word today is: redundancy! Fixate your parts not once, but twice!
So, here you can see my druid T9 shoulders, which as you can see, are fixed
onto my vest. The vest itself openes with velcro tape right here, and also here!
The shoulders itself are also fixed directly to the vest.
Meaning, on my vest I have two buckles and also velcro tape
which is now connected to my shoulders. I open it, take it off the buckle.
And also the other one. So we have not one, but two points where we fixated it!
The velcro tape itself is fixed with hot glue and also wonderflex.
So that the shoulders stay in place I also connected them with a ribbon.
Now I show you my druid T8 shoulders, which are connected to this top.
T8 uses a primary stage to my T9 shoulder fixation.
It is directly connected to my robe with velcro tape and again with a buckle back to the shoulder.
We take it off and as you can see: not a single, but a double fixation!
Hmmm! And now I show you how this here is fixated!
Yeah, Aion. Aion was redundancy of the extreeeme. I'm gonna take it apart. This is the breastplate.
First, off to the side-breatsplate parts, which are fixated in here with a buckle an velcro tape.
Here tape, there tape. One, two! In here and on the buckle.
The other part as well, which we take off. The breastplate itself is connected here with velcro tape.
Off with it. After this, we have the breastplate itself, which is connected to the collar.
Which we will open as well. Here are the buckles and velcro tape.
The collar has tripple fixation. First, buckles here to the shoulders.
And here through velcro tape and more buckles. Here I overdid it a little with the redundancy, because these buckles are not really in use.
So this one is only connected through the buckle and velcro tape. But with a big piece so that it will last.
So, and the other part as well!
Now I'm gona show you how I fixed my bracer. It's a little bit more complicated, so I'm gonna take it off.
Here the upper and lower parts are double connected. First through the tape here. And second through the buckles, here and here.
The upper part is directly connected to the armpiece through the velcro tape.
My shinbone piece is tribble connected. A big velcro tape piece here. This one holds everything up on my leg.
And under all this and also on my bodysuite is a magnet which helps holding the position.
Now my wonderful arsewings. These weigh about 5 kilos, which is half of the entire armor.
I had to screw them onto a plank, because otherwise they would have had no hold and would have hit my legs all the time.
But you don't see the plank, because it is on my backside. The wings are also connected through 4 buckles to a belt.
The belt goes around my waste and is fixated again through a buckle and velcro tape.
So that's it again! I hope you liked it and will watch again next time. Meanwhile visit my blog and facebook channel. Links are below!
But Kamui! What was the most important part again?
REDUNDANCY!!!!1111