Tip:
Highlight text to annotate it
X
Many new owners of PVC windows often complain about drafts from the newly installed windows,
especially in winter. Even quality installations, when everything is foamed, insulated and covered
with plaster, often produce what feels like a cold shower. Well, first, PVC windows are
not completely sealed - that's a myth. If you put a mouse in a jar and screw a tight
lid on, the mouse will suffocate and die. That is exactly what happened to early PVC
window owners when the latter first appeared. That's why Germany - the innovator in PVC
windowing with brands like Rehau and KBE, enforced a standard which requires at least
20% of air to pass trough said windows. So they don't really seal you off from the outside.
But draft are not acceptable! So if you feel them, take a look at your windowsills. Old
brick houses tend to have very deep windows with big window boards, and that is exactly
the reason of your discomfort. The radiator is usually even more distant from the glass,
and the window niche forms a still air zone, which is not heated by the radiator, but is
chilled by the cold glass. And then convection makes its job, and the cold breeze goes into
the room. So this is not cold air from the outside, this is the inside air which was
chilled by the cold glass. So, what should you do? Obviously, try to warm up the cold
air in the window niche. To do that, cut a hole in the window board above the radiator.
Then insert a ventilation grill with strips angled towards the window. This will direct
warm air to the window glass, and the cold shower should seize. And another point. If
you newly installed windows condense water, and black mold forms at the sealings, check
your ventilation. Clogged ventilation may cause high humidity, so plumb it yourself
or call up chimney cleaner service.