Tip:
Highlight text to annotate it
X
Hi! It is Steve from PartSelect. Today we are going to show you how to change the water
delivery tube on the upper rack on your dishwasher and it’s a really easy job and you won’t
need any tools. Let me show you how we do it. Now to do this repair, we will begin by
opening the dishwasher door and we will pull the upper rack out as far as it will come
out and remove any dishes that are in that upper rack. Then while holding the inlet at
the back, we are going to grasp rubber tube. Just pull it off of the inlet. We can tuck
that down through and then we will pull it off of the inlet to the spray arm and we will
discard the old tube.
Next we will reach in underneath and we will slide that over the end of the inlet to the
spray arm; work it completely on till it bottoms out. And we can pull that up through the opening
at the back and just make a bit of a circle with it and squeeze it at the same time. And
we will work it on to the inlet at the back of the rack and again we will make sure that
it is fully inserted. Now we are ready to reload the rack and close the door and our
repair is complete. I told you it was an easy job. Thanks for watching and good luck with
your repair.