Tip:
Highlight text to annotate it
X
Hi! This is John on behalf of Expert Village. In this video clip, I will show you part 3
for installing a new toilet seat. Now with these new bolts we are going to put in, we
are going to go ahead and put the bolt through the hole in the toilet seat, and that is going
to come out the bottom. We are going to start this nut on the bottom; and with this ***
you don’t have to hold it. So as you screw it in, this little *** will hit up against
it to hold itself, so then we will just have to screw it in from the top. I will go ahead
and set the toilet seat on and position those holes so they line up. I am going to put one
of my bolts through and start the washer on the bottom side. You want to make sure the
tapered side or this kind of angled side is going up; and I will do the same for the other
side, making sure that this tapered side is going up. Next we will take our screwdriver
and tighten those bolts down from the top, and again, there is no need to hold them from
the bottom because that little *** will hold it in. Once you’ve got it good and
tight, go ahead and close down those clamps.