Tip:
Highlight text to annotate it
X
Music Intro
Cadcut Gloss is a new special effects material from Stahls' CADCUT direct.
I'm going to demonstrate this material right now and show you how it gives you a patent
leather like finish for decorating on t-shirts.
Now we're cutting the red Gloss material
(music)
(music)
I'll send the pink design to cut and then I'm going to start weeding the red.
(music)
(music)
(music)
The product applies at 305 degrees for 10 to 15 seconds.
Load your garment onto the heat press and preheat.
It applies at a medium pressure.
Position the design where you would like it.
And press it on.
Let it cool down before peeling the backing.
Once it's had a chance to cool a little bit, remove.
You can see the high gloss finish.
I'll line up the second color.
And since the Gloss is going to be exposed directly to the heater I'll use a cover sheet
over the entire design.
And' I'll make sure that my second color gets the full application as well.
Let that cool down and remove.
The high gloss finish is sure to be popular with kids, schools and team spirit wear or
for retail fashion.
So try this special effect material out, order from cadcutdirect.com