Tip:
Highlight text to annotate it
X
Today it's 2010-chrysler-town-and-country. We're going to do a test of part number TH970XT
from Thule. This is a Helium Aluminum 2 Bike Carrier. A little quick note about this carrier
that it will work on inch and a 1"-1/4 receiver hitches both Class 1 and Class 2. It also
works on 2" receiver hitch as well with the included spacer. Now we'll install bike rack
into the hitch, we'll insert the safety pin, its keyed and then we'll turn it 90-degress,
pull back on to get a little bit tension. Then we go ahead and tighten down the anti-rattle
***. We install the safety pin it does have a spacer around it as well. You'll need the
spacer for a small hitch receivers like a 1"-1/4 and 2'' one, we will not need it so
we'd removed it. As closest point from the bicycle raft to the bumper, we're looking
at 4-1/2" and ground clearance will be 9-1/2". We'll move into back at bike rack and we'll
check for access to the back
of the vehicle.