Tip:
Highlight text to annotate it
X
The first step to install the Korky QuietFILL Fill Valve. Is to turn the water supply off
to your toilet. Turn the supply valve clockwise. Flush your toilet to rid excess water in your
toilet tank. Sponge out the remaining water left in the toilet tank. Next, place a bucket
or pail under the toilet tank as shown here to catch the excess water from the supply
line and toilet tank. Unscrew the coupling nut at the base of the fill valve or ballcock.
Pull up on the valve and lift out of the toilet tank. Take your new Korky QuietFILL and place
the valve into the toilet tank and hand tighten the coupling nut. To adjust the height simply
turn the top portion of the fill valve counter clockwise to unlock, pull up on the valve
to set the proper height to the waterline stamped on the tank and then turn the valve
clockwise until it snaps into the locked position. Install the tamper proof key supplied with
the valve as shown here. Insert the metal clip on the one end of the refill tube then
attach the opposite end to the fill valve. Next, reattach the water supply line. Finally,
turn on the water supply line by turning the valve counterclockwise until it is fully open.
If you need further assistance installing the Korky QuietFILL, please feel free to visit
our website or call us at 1-800-LAVELLE