Tip:
Highlight text to annotate it
X
in this presentation record review how to use the one click opc feature
this feature is used to add opc items from opc servers into the opc systems
real time data base in just one click
let's go to the program group opc systems dot net
we'll select to configure opc systems application will select configure tags
select the network node that you want to configure
and let's add a group we're going to add the opc items to.
we'll right click on that group and select add tag.
and we use the button that says add multiple tags from opc server.
we'll browse for the starting position of where we want to access the opc
items
we can either select opc server to import all of the items from that opc
server or select a branch within the opc server and just get the items only
underneath that branch
but the select at all of the items from the kempware opc server.
the lower right you can specify to get the datatype the description or update rate
from the opc server
if you don't select these items and you can enter in specific values yourself.
we could also optionally enable trending
or set the tags to read only
set up the high and low range or the gain an offset for all of the tags
that'll click the button that says that tags
and we've added two hundred twenty-nine tags to the real time service
now we would save the configuration to a file
and then under configure options you can specify that default file to be loaded
when the opc system service starts.
You're now ready to move on to use the data in any of the fifteen product
features of the complete scada software opc systems dot net
for more information visit the website opcsystems dot com.
there you'll find our other training videos and under the contact us page you'll
find our project information for support.