Tip:
Highlight text to annotate it
X
Hello and welcome to this training video. In this video I would like to demonstrate how to add
a gateway into a building.
As you can see I have already drawn a standard building on my desktop and now we need to
go and place our gateway.
Before we place the gateway we have to tell the system where we want the gateway to be
located.
I will simply left click on the building and go to “elevation” and in elevation I now
have a content menu that comes up when I right click. I can then scroll down and select “add
gateway.“
Now I get some measurement markers and I have the possibility to use my set key to align
them exactly where I want them.
So, I will just enter 400 cm and now I can get and drag the first marker point and move
the set around. Say I want a clearing height on 320 cm and I want the gate to be exactly
500 centimeters.
Now I place the gateway directly in the building where I want to have it. From here I can go
in and change its properties and make final adjustments. I can also name my gate, so I will name my
gate #24 and select “protected distance” which is the area from the wall and out on
the street where we are not allowed to place scaffolds.
Let’s click okay, and now we can see gate 24 placed in our building.