Tip:
Highlight text to annotate it
X
Today on our 2000 Volkswagen Beetle, we'll be installing the Yakima Q Towers Roof Rack
System using the Q Stretch Kit, part numbers Y00124, Y00408, Y00134, Y00723, and Y00698.
Now, we've already gone ahead and assembled our Q Tower Roof Rack System off the vehicle.
We've attached the Q123 Q clips to the front crossbar towers along with the pads. We installed
the pads from the Q98 Q clips onto the rear towers and we installed the Q98 clips onto
our Q Stretch kit. So with a little help, we've gone ahead and set our roof rack system
on top of our vehicle. We'll need to make sure that the leading edge of our front crossbar
tower is 9 inches from the windshield. We'll use a tape measure to make sure that
it is. Once we've determined the correct location for the front crossbar, we'll need to make
sure that our rear crossbar is also in its correct location. To do this, we'll use a
tape measure and measure from the center of the front crossbar back to the center of the
rear crossbar. We'll need this measurement to be 26 inches. With our rear crossbar in
the correct location on the vehicle, we'll now use our Q Stretch tower and place it in
the door opening.