Tip:
Highlight text to annotate it
X
Please find this product at http://absupply.net/ This video is to bring you a closer look at
the Pemko 2727G. This is an offset style saddle type threshold. So the 2727 is representative
of the profile. It is a saddle type threshold, if you use your imagination; it looks like
a saddle except that it is offset in the sense that one leg is longer then the other leg.
That is specifically to transition between two uneven floor surfaces. The "G" stands
for a gold anodized finish, also available in mill aluminum as well as dark bronze. There
is an image below this video showing everything important dimensionally about the threshold.
Lets go over that now. You can see from that image that this threshold is 7" overall width.
On the large side of the leg, it is a 1/2". And over here, it is 1/4". So that is going
to give you the ability to offset between flooring disparity of 1/4". Where you might
encounter that would be very commonly the exterior doors of a retail space where you
will have a sill, then a thin tile like a self-adhesive sort of tile flooring that might
be inside of there. That would be a very typical application for this. The fact that it is
gold tells me that it is obviously going to match the other finish on the other hardware.
It could be residential where someone might install a threshold. 7" wide is very appropriate
for exterior commercial applications because commercial frames are typically 5-3/4" or
something larger in that range. Also, if you have a standard aluminum style frame, which
I don't see gold anodized aluminum store front material, but if you had a frame that was
like 4-13/16", you might want the ability to be able to cope your frame into here and
have the ability to have the threshold run long out towards the jamb. Some people like
to have that sort of application. Screws are included and look to be like a #10 x 1-1/2"
flathead sheet metal screws. Available in several different lengths as well. If you
have need for a custom length by all means let us know by ordering the next longest piece
or pieces and indicate in the comment field what length you would like for us to cut the
material back to. The reasoning is that if you had to take this 36" piece and cut it
down to say 30", you would eliminate the countersink. The next one is all the way here in the middle
so you would be stuck drilling another hole and then having unusual center to center locations
of those holes. So if you have a need for a custom length, order the next longest piece
or pieces and indicate in that field what length to ship these out at and we will locate
the countersink at the proper distance from the edge and the proper center to center as
well. Pemko is a full line manufacturer of all things weather stripping related. Not
only material made of aluminum like this base material, but stainless steel, architectural
bronze, and a complement of residential weather-stripping as well. Adjustable oak top thresholds, kerf-in
style foam, weather stripping, etc. Any questions on the Pemko 2727G Saddle Type Threshold or
any other Pemko product, please feel free to reach out to us. Thank you.