Tip:
Highlight text to annotate it
X
Today on this 2006 Chevrolet Uplander, well be installing the Tekonsha PRIMUS Brake Controller,
part number TK90160 and ETBC7 installation. Well now go ahead and get a wire harness for
each install on the vehicle. Well take a gray cable with the black and white wires and connect
it up to the cables on the 7-pole connector. Well connect black to black and the blue wire,
well connect it to our white wire. And then well go ahead and install the loom and get
it ready. Now, well move on to installing the bracket for our 7-pole connector.
This bracket does not come with the kit and it just really depends on what vehicle you
were working with. In this case, well be using part number 18140. Now, in effort to keep
our bracket as close as possible to the bumper when the poles dont quite line up because
the bracket bottoms out on the hitch going that way. So
what
were
going
to do
is simply drill
out the hole here
a
little bit larger
so we can connect
the hardware. Well then pull
down the clamp.