Machine embroidery designs

Hello and welcome to our EM-1010 How-To Series: Embroidery Designs. In this 8-part series, we will learn about the embroidery status and how-to import a design, select a design from the machine’s...
English
Welcome to part 5 of 8 of the EM-1010 How-To Series, Embroidery Designs. Today we will learn how to check your embroidery area and trace your design. Press the Trace Design icon, located in row four,...
English
Welcome to part 6 of 8 of the EM-1010 How-To Series, Embroidery Designs. Today we will learn how to delete a design. To delete a design from the machine’s memory, press the File icon located in row...
English
The USB stick that comes with this machine has designs loaded on it. They're the same designs that you have in your sampler book and, what's nice about these, is these are actual size,...
English

1

annotations

Welcome to part 2 of 8 of the EM-1010 How-To Series, Embroidery Designs. Today we will learn how to import a design. Your RiCOMA home embroidery machine reads .DST files, the most common of all...
English
Welcome to part 3 of 8 of the EM-1010 How-To Series, Embroidery Designs. Today we will learn how to select a design from your machine’s memory. Make sure the Embroidery Status is set to unlocked. For...
English
So what comes with your embroidery machine for designs? Find the book in your box that says Designer Topaz Sampler. These are the built-in designs that come on your usb stick. First off, the number up...
English

1

annotations

Hey everybody! Have you ever seen or heard about felties and wondered what they are and what they're used for? Well, you've come to the right place. So, what's a feltie? A...
English
Hi! I’m Anne Beckett with Anne’s Embroidery in Austin, Texas and we’re looking at Sebastian’s bird which is the project we’ve started a while back not too long ago. Basically this is the end product...
Hi! I’m Anne Beckett with Anne’s Embroidery in Austin, Texas I’m going to show you how to setup an embroidery design on behalf of Expert Village. You probably have already seen the drawing now I have...