Today on this 2012 Honda Civic Hybrid we'll be installing the Draw-Tite Hitch, part number 24763. Here are a few measurements that will help when selecting accessories for your new hitch such...

1

annotations

Today we are going to take a look at Optronics Round Marker Clearance Light with red LEDs, part number MCL-50CRK. This is a clearance or side marker light that is designed to flush mount against your...

1

annotations

Today on this 2007 Chrysler 300 we are going to be installing Curt hitch part number 13465. We are underneath the vehicle, the first thing we want to do is lower down the exhaust. Depending on your...

1

annotations

Today, we've got a 2007 Honda Civic Sedan and we're going to be test fitting the RockyMounts Euro PitchFork Roof Mounted Bike Carrier, part number RKY1103. This bike carrier is...
Today, on this 2013 Honda Fit, we're going to install part number 24826 from Draw-Tite. This is what the hitch looks like once installed on the Honda. We'll go ahead and give...

1

annotations

Today on our 2010 Honda Accord, we'll be test fitting the Thule square load bar system using the 58" bars, part number THLB58, the Thule Traverse roof rack foot pack, part...

1

annotations

Here is an exciting Fortress company LED lighting component that brings life to your post cap and decking designs. You can transform your Flat Pyramid Post Cap by Fortress Accents from ordinary to...

1

annotations

Today on our 2010 Chevrolet Traverse, we will be installing the Roadmaster EZ base plate kit, part number 523149-1. Now to begin our installation we will need to remove the front bumper cover, to do...
Today on our 2002 Toyota Tacoma, well be installing the Putco Plasma 921 LED bulbs, part number p240921w-360. Well lower the tailgate to gain access to the two bolts that hold our taillights in place...
[FRS BRZ music] [sound system music] Section one, Vehicle Preparation. Prepare a protective surface to place all vehicle compenents on. Apply the parking brake. Open the trunk and hood of the vehicle....