I'm going to show you a completed kiln. This is another electric kiln that has been fired. It is a low fire, or cone 04 firing. You can see the glaze work here. The clay from earlier has...
JASON PAINTER: Hi, my name's Jason. Today, we are painting on glass. We just outlined the glass. We're going to take the design off now--or out now--and always be mindful, again, of...
We're going to do a floor, this time, with leaves. I have my hot glue gun ready to go and I'm just going to put a little bit of hot glue right on the bottom where I want one of the...
So I like to have, I have this really crusty piece of paper that I've used over and over for berry bowls. I like to do five point symmetry on these. So what I do is I take the needle tool, I...
So now that I know where I'm going to punch my holes and I've got my tool prepared I'm going to go ahead and start making them. So you basically push in and twist a little bit....
Now sometimes you're going to want to have a different color on the inside of the piece than you are on the outside lip. The way that we achieve that result, is we get a little pitcher, stir...

1

annotations

In this step, we will cut the front panel away from the back panel and then cut the back panel the exact same way we did the front panel. To cut the front panel off, we drew our line six inches from,...
Hi, we're talking about copper foiling and I'm giving you a break down on the tools and the chemicals that you?re going to be using in the process of making our sun catcher. This is an...
So in order to put some feet on this piece, I'm just going to get a little bit of clay, get a small handful, and first I'm going to shape the first. I'm just going to pinch a...