Tip:
Highlight text to annotate it
X
Basically a wing, what the wing is is a break in the rail line. So in other words the water
flow will come down to the wing and the release off the wing which when I say release what
it does is when you're going in your turn the water flow will come here, release and
give you a quicker turn. So the water flow comes down here, releases off the wing and
then you get a quick turn and also the wing is actually because it sticks out it actually
holds into the face of the wave when you're driving on the face of the wave. The wing
is usually situated right by the fin area. So that it works in conjunction with the fin.
So right by the fin area you have your wing for release and it comes down and then it
flows back into your tail. If you put, if you choose to put a wing into your rail line
like that you are looking for a quicker snapping turning board. You like the fishtail or you
like the rail line that you're going to be using. But you want to put a break in that
rail line to make it turn that much quicker and release when you're turning. Otherwise,
if you don't have a wing the water flow will go all the way down and not give you a release
point and you'll project further down the line. So the wing is giving your release point
and shortening the radius of the turn. That is your wing tip.