Tip:
Highlight text to annotate it
X
Welcome to the instructional video for the Burley Nomad.
First remove the contents, and start by installing the side panels.
Slide the panels into their receiver on the lower frame, and then lock them into place
with the C-clips, which are highlighted here in red.
Note the orientation of the panels, sloping downward towards the back of the trailer.
Next install the cover and central roll bar. The roll bar and cover are both locked into
place with the provided screws. Place the roll bar in the middle and align
it with the holes in the frame. Then place the screw through the cover and twist it into
the threaded interior of the roll bar. The tailgate and splashguard can by locked
into place by pulling their straps over the top of the frame, and clipping them inside.
Note the orientation of the panels, sloping downward towards the back of the trailer.
Lastly install the quick release wheels and tow bar.
The Nomad has a handy central divider, that velcros into place on top of the roll bar.
If you have any additional questions about your Nomad, please visit our website at Burley.com.