Tip:
Highlight text to annotate it
X
In this segment I'm going to show you how to cut some pieces of glass. First, I get
out my cutter and I open it up a little bit so that the oil will flow through it. Now
if I'm doing a certain design I'm going want to put a line on there with my marking pen
to show where I want to cut it. And I use this board that I got at a stained glass shop,
I'm not sure what its called but its got little things or holes in there. And with the little
pieces of glass can drop in so its much easier to use. So anyway I'm going to make this cut
right along there. Then I'm going to take this running pliers. Put that right on that
line and Ouila there you are, its cut out. Okay I can make some smaller pieces out of
this if I want. Another line here. And run the cutter along that and then again this
running pliers on there and they just break beautifully. It doesn't always though. Sometimes
you screw it up and that's how I get these scraps from people that have done that and,
you know, it doesn't work right. Now with these nippers you just put it on the edge
there and you go like this, you just nip them along so you get little pieces. Anyway that's
how you do that and then when I would get these little pieces again I put them into
some kind of container so that I have those organized for when I'm ready to use them.