Tip:
Highlight text to annotate it
X
Alright, today on this 2012 Honda CRV were going to do a test fit of part #: C18145 from
Curt, this is our 20x48 inch cargo carrier. One thing to note about this cargo carrier
that it can work with inch and a quarter receiver hitches and it will also work with two inch
receiver hitches with the included spacer. Well start off our test fit by installing
the cargo carrier into the hitch, then well tighten down the anti-rattle bolt and then
well install the safety clip on the other side. Now well go ahead and get a few clearance
measurements. From the edge of the bumper to the cargo carrier will be 4 inches and
the overall length will be 24 inches, and the clearance from the tailpipe to the cargo
carrier will be 9 inches. Now since the exhaust of this vehicle does point straight out back
towards the cargo carrier be careful of the items you place back there in case theyre
heat sensitive. Now ground clearance is going to be 12 inches.
Now well go ahead and check access to the back of the vehicle. Alright, that looks good and
with that, that will finish it for our test fit of part #:C18145 from Curt on our 2012
Honda CRV.