Tip:
Highlight text to annotate it
X
Measuring for cellular shades is simple – it’s just 2 easy steps. In this short video you
will see just how easy it is to measure for an Inside Mount. Inside Mount refers to a
shade that is mounted on the inside of your window frame. This type of mount is by far
the most common choice and is highly recommended. An Outside Mount is typically used in only
2 situations; if there are obstructions inside of your window-frame such as an alarm sensor,
OR if your window frame lacks sufficient mounting depth to hold your shade. Our web site provides
details on how much depth is required to install your shades with an Inside Mount. In most
cases the depth that you will need is only a few inches. When measuring for any window
covering, it is important to use a steel measuring tape and round to the nearest 1/8” of an
inch increment. Your first step is to measure the width of your window; rounding down to
the nearest 1/8” increment after taking each measurement. Begin by measuring the inside
width of your window opening in three places; top, middle, and bottom. After recording your
three measurements, select the narrowest one. This will be the width you will order. Please
do not make any deductions to this measurement; the factory will make your shade slightly
narrower so that it can properly move up and down within your window. Your second step
is to measure the exact height of the window opening in three places; left, middle, and
right. Choose the tallest measurement; this is the height you will order. Now that you
have completed these 2 simple steps you are ready to place your order, it’s that easy.