Tip:
Highlight text to annotate it
X
In this video we are going to show you how to replace the Image Drum/Photo Conductor
Unit in a Samsung CLP310 N Series or similar model printer.
Open up the front cover on the printer. There are four cartridges in the printer.
Take the top cartridge out by pulling on the handles at either end of the cartridge.
Remove the remaining cartridges. Remove out the waste toner tank by pressing
down on the green release lever at the base of the waste toner tank and sliding it out.
Remove the drum by pulling firmly on the handle. To replace the drum unit, push it firmly into
place until you hear the click. Slide the waste toner tank into place and
press firmly until you hear a click. Replace the cartridges by sliding them back
in to the printer, and pressing firmly until you hear the click.
The cartridges must be inserted in the proper position. From top to bottom this is Yellow,
Magenta, Cyan, & Black. Ensure that the cartridges are oriented with
the electronic chips on the left. Close the cover and the printer is ready for
use.