Tip:
Highlight text to annotate it
X
Now that we have the shaft part attached, to the small base, we want to attach the small
base to the large base. So, we're going to do, basically, the same thing, we just did.
Center it on there, lay down some strips of tape, so that we can reference it, lift it
up just a little bit, mark a hole with a little pencil, come in with the small drill, drill
a hole in there, in there, there, there and turn the assembly, upside down, and line up
some screws. Now, this is a little bit tricky because you have to do it, upside down. So,
I'm going to find my original screw holes, it's right here, line it up nice and screw
the large base, to the small base. Now we basically have the body of the lamp, built.