Tip:
Highlight text to annotate it
X
Welcome to the awesomeguy67 channel! The film date of this video is Saturday, November 23rd,
2013. On my channel, I film videos about Hot Wheels, which are toy cars with tracks. I
also film something called Snap Circuits with pieces that you put together to learn about
electronics. I also have a hockey table over there that I might film some matches with
someone which I will mention just about now, and while my videos are rolling, I might talk
about my day, and how it has gone. OK, I would like to introduce someone special who is going
to have his own YouTube account, my brother Michael, or quickfast38 (applauding) . So,
are you excited to have your own youtube account? (quick nods) I'm not sure what he will film
on his videos. You'll have to wait for the intro. Anyway, since I said I will be looking
at Hot Wheels, today I'll be looking at the Wall Tracks Starter Set. Wall Tracks is a
series that Hot Wheels used to help moms by using these brackets to stick to the wall
with these 3M command strips. I will talk about brackets and command strips in other
videos. This is the front of the box. It is safe for walls. Uses the command strips for
damage-free hanging. This is the back of the box. You load cars up, come down, they have
a 360 degree loop, you have a diverter switch you can bust through the wall, or you can
go here there's a trap door you can open, flipetty-flap ramp and then you jump through
the gates if you go through the normal exit. I've opened this up, so let's get to the set.
So, here's the gate they were talking about, you push this to start. Then the car comes
around the loop, and they hit this one and then this one comes in the back and throws
them around. This diverter switch allowing them to come through this gate here. Here's
the trap door I was talking about. It stays open. You can go down this jump and you can
put anything here. You have your flippety-flap ramps, and the jump-through gates, I have
attached this to another set. Anyway I've got 7 cars here, you can load a few cars in
this, but I recommend the 1st one being a loop car so it works in the loop. GO! Oh!
That's what I recommend about this set, doesn't work too well. When a car comes and hits this,
the next car will go. Let's put a car up and use the diverter switch, it doesn't work too
well either. It's kinda narrow. (squishy flat) Take the car here, lets demonstrate the trap
door. Whee! AAAAAH! So, even though this set doesn't work too well, l recommend this set
1st. Just get a new car. There you go! The Hot Wheels Wall Tracks Starter Set from the
Wall Tracks series. Thanks for watching! Bye-bye! See you in the next video!