Tip:
Highlight text to annotate it
X
I'm going to show you how to put on the easy to use iron on labels.
First of all before we start, just wanted to tell you,
you should put your iron on the cotton setting,
make sure there's absolutely no water in there
and don't use any steam.
So, I have my packet right here,
it actually says the instructions here
so I'm just going to walk you through it.
I just take it out,
I want to place it under the hem.
In case you were thinking of putting it on the care label,
it's not really suitable for that.
Just pick a space in the collar right under the hem.
The next step is I'm actually going to put the iron on there
for 15 seconds approximately,
try not to move it at all, because it might smudge the ink.
Here we go,
after it's been on there for about 15 seconds
I'm going to check if everything is secure, if the edges are secure.
That was probably about 15 seconds let's have a look.
You can see the edge is still a bit loose there
so I'm just going to put my iron back on
for just a small amount of time.
So here we are...
...and that's it!
Now you would just want to let it cool down,
don't wash it for an hour at least
and yeah, that's you.