Tip:
Highlight text to annotate it
X
Spills.
Scuffs.
Stains.
Without the right protection,
your tile or stone surface can be seriously, even
permanently damaged.
Safeguard your investment
as you increase the life of your tile or stone installation with Aqua Mix® sealers
and cleaners.
For more than three decades, Aqua Mix® has been the leading supplier of stone and
tile care products, and has repeatedly been voted the number one preferred
brand by professional contractors.
Sealing is the first step towards protecting your surface from stains.
Here's how it works:
Aqua Mix® places that thin layer of high-end polymers between the surface of
the tile or stone
and the potential stain,
giving you time to clean up before the potential damage becomes permanent.
With Aqua Mix®, sealing your tile or stone surface is simple. In fact, it's as
easy as wiping down your countertop or mopping your floor. First,
give the surface a thorough cleaning. Remove dust, dirt, grease, water spots and
any other contaminants.
Next, apply Aqua Mix® sealer.
Use a clean sponge or a mop with a lamb's wool applicator.
There should be a damp layer dwelling
on the surface.
Let the sealer sit on the surface for 5 minutes.
If sealing a porous surface and the sealer penetrates before 5 minutes,
apply additional sealer.
Then, wipe the area completely dry with a clean microfiber cloth or paper towel.
Be sure any remaining residue is removed.
It's that simple.
There's a full array of Aqua Mix® sealers to fit your needs.
Sealer's Choice® Gold delivers maximum protection against stains while offering
a natural, no-sheen look for all types of title, stone, and grout.
Enrich 'N' Seal™ provides the same powerful stain protection while enhancing the
appearance of stone and grout.
Sealing with Aqua Mix® is an important first step,
but long-term protection also depends on using the right cleaner.
Beware of household products that claim to be a tile cleaner or an all-purpose
cleaner; they may contain harsh chemicals that can damage your tile, stone or grout,
leaving it washed out and dull.
That's why Aqua Mix® cleaners feature a non-acidic formula
for safe, effective everyday cleaning of all tile, stone and grout.
For quick, convenient clean-ups, just follow two simple steps:
Step 1: Spray it on.
Step 2:
Wipe it completely dry, careful to avoid streaks.
Aqua Mix® countertop cleaners also contain sealer, so each time you clean,
you're continuing to protect against stains.
For floors,
add Aqua Mix® concentrated stone and tile cleaner with warm water, and apply
to the surface with a mop. Be sure to wipe completely dry, careful to avoid
streaks.
So don't let a spill stain your home's beautiful title or stone
installation. Protect your investment and add longevity to your tile or stone
surfaces with Aqua Mix® sealers and cleaners.
For details, visit custombuildingproducts.com