Tip:
Highlight text to annotate it
X
Hi this is Taylor. Today we're going to discuss how to refill an HP 22 Cartridge. HP Cartridges
are very easy to refill. You simply need to remove the sticker placed on by the manufacturer,
revealing top holes which gives you access to refill the cartridge. Once you fully remove
the sticker, you will see that each hole has a slight cue of the color on it. The top one
is for the magenta, this one over here is for the yellow and then the cyan or blue is
place in these two holes over here. To refill them, simply insert a needle full of ink into
the select color and slowly inject the needle, slowly inject the ink. For the HP 22 Cartridge,
although it doesn't give you very much to begin with, you can put about 5 ml. of ink
into the cartridge for each chamber. Once you've refilled with 5 ml. in each chamber,
put the sticker back on and make sure the contacts are clean, which you can clean with
a rubber eraser, then insert back into the printer and run a cleaning cycle.