Tip:
Highlight text to annotate it
X
Today, we are going to walk you through the setup process for your new Broadcaster camera.
Before we begin make sure that your computer is connected to a Wi-Fi network.
Once you've established your connection, go to the Logitech.com site and choose the
"support + downloads" tab. You will choose "Webcams" from the support page
and then, the "Broadcaster" camera.
Now it's time to download the software. So choose "Downloads" and then indicate
what Mac OS you are running.
You will now be walked through a series of screens prompting you to download and install
the broadcaster software.
Ok, now that your software has been downloaded you can connect your camera.
Select the type of setup "New Camera" or "Existing Camera."
Now power on the camera by pressing the button on the bottom right of the camera. The power
indicator will illuminate and blink in sequence to signal that the camera is on.
Once the camera has been turned on, click "Next" and now provide a camera name.
Now you are ready to connect to your Wi-Fi network.
Now, the final step is to scan the QR code. To do this, hold your camera directly in front
of the QR code, no more than six inches from the screen. Press and hold the large round
button until you hear a beep.
This process should connect your camera to the network.
Your camera is now online. Click "Finish" to finalize the installation.
You are now ready to use your Broadcaster camera.