Tip:
Highlight text to annotate it
X
Upgrading the RAM, also called memory, on your notebook or ultrabook PC -
is a quick and easy way to speed up nearly everything you do on your computer. -
Here's how it's done.
Before you begin there are a couple things to keep in mind.
Make sure the memory you have IS compatible with your system.
Kingston.com has a handy online tool to help you easily find which memory is compatible with you computer.
Next, your work surface should be clean
and you should ground yourself first by touching an unpainted metal surface to prevent damage to any components.
And lastly, in most cases,
a simple philips head screw driver is all you'll need to upgrade the memory on your notebook computer.
First, remove the battery
and just to be sure all the remaining power is drained from the computer
press the power button after the battery is removed.
Find where the memory is located on your computer
sometimes it'll be identified on the underside of your computer
otherwise you'll need to consult your computer manufacturer's website before you begin.
Then, remove the small screw, or screws, on the memory bay door
and set it aside, but be sure to set the screws in a safe place so they don't get lost.
Now you should have a clear view of the old memory in your computer.
Carefully push the metal clips on both sides of the memory module outwards to release the first memory module.
You'll notice it pop-up slightly
If you're installing 2 memory modules, do the same with the second memory, as well.
This can sometimes be found next to or even underneath, the first memory module you removed.
When installing the new memory, it's important to notice the alignment notch on the memory that lines up with the notch on the memory slot in your computer
If it doesn't line up, flip it around and slide in the memory module at roughly a 45 degree angle, but don't to force it in.
The memory will fit snugly into place with light, but firm pressure.
Once it's in place, press down on the outside edges until you hear the clips on the sides snap into place letting you know the memory is secure.
If you're adding more than one, repeat this process for the other memory and then replace the memory bay cover and screw it into place.
Replace the battery and turn on your computer.
On some systems, your computer may alert you that the amount of memory has changed.
Don't worry, just enter the BIOS and accept the changes.
And that's it. -
If you have any questions or need additional help installing memory on your computer, be sure to visit www.kingston.com/support for more information. - -
Thanks for watching -