Tip:
Highlight text to annotate it
X
Print your image on special sublimation paper and cut it to fit the size of the plate
Place the image face down on the plate and stick it with heat resistant tape
Use a sheet of paper and roll it to make a tube which will help to vacuum the air
Place the plate in the 3D oven followed by the paper tube and a protective paper to prevent staining
We recommend to use gloves because the oven reaches 200 ° C
Push the membrane down and press to vacuum the air
Check that there is no air left on the printing area
Close the oven and wait 7 minutes
Open the 3D oven and lift up the membrane
Wait until the plate is cold, and remove the paper
The plate is ready to be used as a decoration item
Time and temperature could vary depending on the machine, paper and inks used