Tip:
Highlight text to annotate it
X
Okay today we are going to take a quick look at Rhino Racks custom DK clamps for their
for the 2500 series roof bars part number DK320. Inside the pad and clamp kit, you are
going to find four clamps and four pads. These are vehicle specific to this application.
The pads are designed to fit the contours of the roof of the vehicle and the clamps
are designed to fit around the doorframes so that you have a good snug fit. These parts
are designed to work with Rhino Racks 2500 series foot and real quick well show you how
the whole system goes together. First, well take the door off.
The rubber pads are going to sit on the bottom of the foot here. They just push over and
theres a center pin on the pad thats going to line up with the center hole here on the
bottom of the foot. To install the clamp on your foot, all you have to do is back this
tension bolt all the way out, put the clamp over it and reinstall the bolt. This whole
assembly then will seat at the edge of your vehicles roof and this clamp will fit around
the doorframe and youll take the tools included with the bar kit to tighten down that bolt
and thats it for our review of Rhino Racks custom DK clamps part number DK320.