Tip:
Highlight text to annotate it
X
Look the Batman light!
I'm Batman!
For the Batman Cane I use Fimo Classic in black and yellow. As tools I use a very
sharp knife, Clay Machine and a Dottingtool. The link to the template you
can find in the info box.
I roll out both colors. At level 1.
I trace Batman symbol with an Dottingtool.
I cut the Batman symbol. The knife should be especially pointed and sharp.
The rest is formed into a ball. Overall, I sculpt six Batman symbols.
I put together the six bats.
I embellish the spaces with an Dottingtool.
I fill the holes with yellow Fimo. The Fimo must in all spaces.
The filled Cane should look like this.
I wrap the cane with a yellow ribbon.
I wrap everything with a black ribbon.
You can reduce the cane.
You're done.
For the Spoon I use the Batman Cane, the Fimo colors blue, black and pearl white
and chalk. I use a spoon, a fine hair brush, a knife, a Dottingtool and the Clay
Machine.
I mix colors. The black is halved and mixed again.
I roll out both colors. At level 5.
I cut two large triangles.
I connect the triangles.
I cut the Fimo.
I wrap the spoon with the polymer clay.
The front of the spoon, I wrap a yellow ribbon. Rear I press on the Batman Cane.
With an Dottingtool I carve the abdominal muscles.
The contours I retrace with chalk.
You're done!