Tip:
Highlight text to annotate it
X
Today on our 2013 Dodge Avenger, well be installing the Rain-X Weatherbeater Windshield Wiper
Blades, part number rx30224. This is a frame style blade, 24 inches long. For the passengers
side, well be using the 22-inch long wiper blade, part number rx30222. The Weatherbeater
wiper blade is a replacement wiper blade that provides ultimate visibility in wet weather.
It meets or exceeds the OAM standards and has a windshield-hugging frame style design
with multiple pressure points that delivers a clean wipe. The long-lasting, all natural
rubber edge resists cracking, splitting, and tearing.
To install the Weatherbeater wiper blade, well first need to remove the old or manufacturers
wiper blade. To do this, well raise the wiper arm up to gain easier access, open up the
access cap, then tilting the wiper blade slightly, we can press on the wiper blade locking tab
and then remove the wiper blade from the wiper arm. Now to install the new wiper blade, well
simply line up the wiper blade with the J-hook in the arm and push and lock it into position.
I recommend you give it a couple of quick tugs to make sure its snapped in completely.
Then we can go ahead and return the wiper arm and wiper blade
to the windshield.