Tip:
Highlight text to annotate it
X
Okay, the first step that we're going to do to get started rethreading this drawstring
is get our safety pins and decide which one we're going to use to run through the casing.
And that's what we do basically is attach the safety pin and put it through the holes
and run it all the way around and come out the other side. So mine has grommets here
and so I can't have a safety pin that's too big, something that won't fit inside. And
so I have chose two here, I know the small one's going to fit by just looking at it,
but I want to make sure this one fits in, so yeah, that fits in there perfectly. If
I had one size bigger I know it wouldn't fit. Now most drawstrings, the holes they have
are like little button holes that are slits, and anything can fit right in there, it's
real loose. But these, they're pretty specific, so I want to make sure that fits. Okay, so
now that we know we're going to use this silver one, and I'm going to put this one away, now
we can look at the drawstring and I'm going to show you how to attach the safety pin to
the drawstring without hurting it. And I'm going to show you how to do that in the next
clip.