Tip:
Highlight text to annotate it
X
Clearly Protected Laptop provide scratch and impact protection
for the outside of your laptop as well as the interior hand rest and trackpad.
First let's make sure the exterior is clear of any dust and debris by using the supplied cloth.
You can now use the supplied solution and spray down one hand,
then, using the same hand you sprayed
peel off a corner of the film from the paper backing. Once a corner is free
spray the back side of the exposed Clearly Protective film and then remove the rest of the backing.
You can now spray down the entire back side in the film as well as the top in the laptop.
Once both portions have proper coverage, way the wet side of the film
onto the top at the laptop. The solution allow you to position the film correctly after laying it down.
Once aligned correctly use the supplied squeegee and firmly pressed the film into the laptop,
working on any bubbles.
Once all the bubbles are removed make sure you wipe down the top and sides of the laptop
one more time absorbing any excess solution.
You can now turn the laptop over and do the same to the bottom.
First clear of any excess dust and debris using the cloth.
Spray one hand with the solution and use the same hand to start removing the Clearly
Protective film from the backing.
As you remove the backing you can remove the holes that will go around the feet.
Make sure to keep spraying down the film as you remove the backing.
Once this is ready, spray down the bottom part of the laptop and then place the
wet side they Clearly Protective film onto the laptop.
You can then reposition the film correctly making sure all the openings line up.
You can now use the squeegee and firmly press the film into the laptop working our the bubbles.
As you work out the bubbles use the cloth to wipe up any excess solution around the edges of the laptop.
Let's now open the laptop to install the inner portions. Again wipe down the hand rest
and trackpad area with the cloth, removing any dust and debris.
When ready spray one hand with the solution and peel off the backing of the film.
Spray the back of the film as you remove the paper backing.
Once the backing is removed you can remove the track that portion of the film and set it aside.
Spray down the hand rest and trackpad area with the solution
and then place the film into the area.
Carefully align the film and then once in place
use a squeegee to firmly press the film on, working out any bubbles.
Again, as you do this use the cloth to wipe up any excess solution around the edges at the laptop.
Once this portion is in place, spray your hand down again and pick up the trackpad section.
Spray the back this section with the solution, as well as the trackpad.
You can then lay the film onto the trackpad and position into place.
Once aligned use the squeegee to firmly press into place working out any bubbles.
Use the cloth to wipe up any solution around the trackpad as you press it into place.
Your laptop is now protected.