Tip:
Highlight text to annotate it
X
Hi guys, today were going to be making a single triple FunLoom bracelet just like this one.
You're going to need your 4 colors, C clips, your loom with the U shaping up, a hook and
a pair of scissors. So I'm going to start with black. I'm going
to put it on the first column all the way to the left. And I'm going to put it on the
first and second pegs. I'm going to take another band and go on the second and third pegs.
Take another one and put it on the third and fourth pegs. I'm just going to keep doing
this all the way down. Ok. Once you've done your first column you
grab your second color which I decide is going to be green. And go on your second column,
go on the first and second peg, just like you did with the black one. And take your
next band and go on the second and third and keep doing this all the way down.
When you're finished with your second column you're going to take your third color, I've
chosen yellow and go on the third column first and second peg. Then the second and third
and keep doing this all the way down just like the other two.
Ok, now once you have all your three rows completed you're going to take your fourth
color and put it in the triangle shape, starting with the second peg in the middle, just like
this. So you skip over all first three pegs. You take another one and make another triangle
right above that one. And you just keep doing this the whole way.
So then when you have all your triangles on, you want to take your loom and flip it the
other way so the U's are shaping down. Then you take your hook and you go into the very
first triangle go over the white band and get the yellow off the first peg and bring
it forward. Then you go into the white of the second triangle and grab the yellow down
there and bring that one forward. Then go into the white of the third triangle and grab
the yellow one and put it on the next peg. And you repeat this all the way down. And
then you move onto your second row, the green column. So it's easier to get this one because
the white's not really touching it. But you still have to go inside the triangle.
And then for your last color you want to repeat what you did with your first color so go in
the triangle and move the white around. You get the black and put it on the second peg.
Go into the next triangle, get the black and move it onto the third peg.
And the third triangle, get the black and move it onto the fourth peg. So after you're
done hooking all three columns you want to take your yellow bands all the way on the
left grab them off the first peg and put them onto the centre one where the green is. Push
it down a little bit. And grab the black ones from the right column also put it onto the
centre one. And since you're going to need to extend this bracelet because its not going
to be long enough I'm choosing to do it with the green coloured band. So you want to take
your hook, go on the first peg all the way through, put an extra green band on here,
bring it up and hook on the other side as well. Scoot it down a little bit to get it
nice and secure and then you're going to start taking off your bracelet...off all the pegs.
So now you've got your whole thing off and you're going to take some more of the greens.
Flip over your loom. And you can use any of the columns, just making an extension, so
we're putting them on the same way we did before. I'm going to go, let's see, about
three quarters of the way down. It just depends on the size of your wrist. And then when you're
done with that, you take the loom, turn it over again. Take your bracelet put part of it on that last peg. Stretch it
out the peg even further. Then you want to hook them all like you were just doing before.
So you don't start with this one, you start with the second one, where there's an extra
green. And then once you get all the way down, you take your C clip and you want to hook
it on, onto this very last two bands. And you start to pull off your bracelet. And there
you go. All you have to do next is hook the other side to that very last band. And there
you go. And there you have it...your single triple FunLoom bracelet.