Tip:
Highlight text to annotate it
X
Hey! My name is Kyle Hodge and today I am going to be explaining to you how to un-install
and install motherboards. Now after you have put the CPU and heat fan back on, it's time
to put the RAM back in the motherboard. Now depending on your configuration of RAM, rather
you have 1 stick of RAM, 2 sticks, 3 sticks or even 4 sticks, different motherboards have
different ways of configuring exactly how you should put the RAM into the motherboard.
You should refer to motherboard user manual for that information. After the RAM has been
placed back in the motherboard and locked into place, you should start putting back
in the power supply with a 20 or 24 pin connector. Don't forget to also plug in the 4 pin connector
and then reattach your IDEE cables for your CD Rom hard drives and floppy drives. If you
are not using IDEE cables, you can use your serial ATA cables to plug in the motherboard
if the motherboard has that capability.