Tip:
Highlight text to annotate it
X
On the rear panel of the transceiver SunSDR-MB1 you can see connectors...
There are two antenna connectors for HF
Two antenna connectros for VHF
DAC OUT - direct output from High speed DAC
with power +10dBm(10mW) and high quality
IMD3 DR about 80...85 dB
ADC IN- direct input to the high speed ADC
Also you can connect UHF/SHF transverter
or use as spectrum analiser...
Reference input for 10 MHz external high stability generator
Attention! All HAM's!
please welcome, after 5 minutes we will make main photo... :)
Reference input for 10 MHz external high stability generator
Needed for working in UHF/SHF bands with transverters..
..for special DIGI modes etc.
WiFi connector for WLAN antenna and remove control by WLAN
RX OUT needed for using additional filters For example, you can connect
filter of 4M bands, ATT or P.AMP etc. ...between ADC_IN and RX_OUT connectors
PTT connector for the foot switch
KEY connector for the CW Key
ALC input for external PA
GPS antenna connector for optional GPS receiver
It need for synchronise transceiver from GPS system
or for using transceiver as GPS Navigator, as APRS tracker etc.
The switch of Embedded speakers
Ext.control connector for control of PA, Antenna switch, BPF etc.
Special additional Ext.Control 2 connector For mobile whip antenna 9310
from Stealth Telecom which works with own protocol
LAN connector for connecting to external LAN
internet, remote control etc.
Power supply connector AC 220V
Power supply connector DC 12-15V (for test)
Additional Display connector
RS-232 connector (COM-port)
You can control via CAT system external PA
or connect it to additional PC with Logger, contest logs etc..
Two USB connectors for mouse, keyboard, memory stick etc..
Connectors of embedded PC's sound card
You can use it for listening music, Skype etc..
Fans for cooling the transceiver..