Tip:
Highlight text to annotate it
X
Today on our 2012 Toyota Camry, well be test fitting part TH934XTR, the Thule Hitching
Post Pro. And our vehicle is equipped with the 1 -in hitch. So that with our bike rack
assembled, were ready to go ahead and fit it to the vehicle. Well simply slide the bike
rack shank into the hitch, line up the hitch pinhole and install our anti-rattle bolt.
With our bolt tight, our bike is secured to the vehicle and this is what it would look
like. Now well go ahead and give you a few measurements.
Our ground clearance is at the bike rack is 9 inches and from the closest point of the
bike rack to the back of the vehicle is 12 inches. Well now go ahead and pull the pin
at the bottom of the mast to tilt our bike rack down and open the trunk. And as you can
see, we can gain full access to the cargo area with this bike rack. Well now go ahead
and pull the pin at the top of the mast to bring the dual arms out where we can then
open up the straps exposing our cradles. Next well put the bike into the cradles and bring
the straps around securing it to the bike rack.