Tip:
Highlight text to annotate it
X
Hi, Bill Delucchi, Delucchi Electric
hope you've checked out our video for out prefabricated electrical cut in assemblies
if not, check it out.
I'm here to talk about the numbers
when it comes to using prefabricated assemblies and service work
let's start with the way you bill, time and materials. I'm going to start with materials.
using a Delucchi Electric Prefabricated Cut In Assembly
you spend approximately seventy five dollars on a single gang duplex
cut in box
this price is approximate because the changes depending
upon the type of device that you use
using industry standard 40% markup on materials you are adding thirty
dollars
which comes to a hundred and five
using the standard parts and pieces that a technician would use on a job
site
you are at $55
and running the numbers you come to additional twenty eight dollars
in extra profit using a Delucchi Electric Prefabricated Assembly
on time
using a Delucchi Electric prefabricated assembly
I'm estimating conservatively
that you are going to save five minutes when it comes to material movement
at a job site alone
the guy going to his van
getting out the material, searching around, putting them on a cart and running
them into the building
you'll also
get an additional five minutes, conservatively
when it comes to splicing and adding a plug to that cut in box
as he's putting it together
that comes to ten minutes
you do six of these
and you get an additional one hour
of extra billing
that the customer is paying for. You don't see it out of your own pocket.
and that is profit to your bottom line.
if you had any questions or you'd like some more information please contact Mike or I at
6-5-0
364-3696 or visit our web site
www.DelucchiElectric.com