Tip:
Highlight text to annotate it
X
Today I'll be walking you through a basic overlook of the installation
process for the Recon projector headlights.
To begin the install we will first need to remove the factory headlight
assembly. We will use an extended socket to get to the mounting bolts. We
can use a flat head or picker to remove the plugs. Once we pull off the
headlights, unplug the bulbs, then plug the factory bulbs directly into the
Recon headlight assembly.
Next, we will want to match up our positive wires for the headlights. Then
match up our positive wires for the running lights. With the basic
connectors we can connect all of our positive wires. Then we will connect
all of our negative wires. Use a little shrink wrap and ground them on the
truck inside of where the headlight assembly goes.
Next we will use electrical tape to hold everything together so our wiring
looks nice and clean. Once we have connected all of our lights, we will
test them real quick before reinstalling the entire assembly. As long as
everything is running correctly, we will then reinstall our headlight
assembly and tighten everything up. We are now ready to light up the night.
For further installation instructions, please visit our website or give us
a call.