Tip:
Highlight text to annotate it
X
Hey, what's up guys. David Glenn of davidglennrecording.com and theproaudofiles.com here with part three
of our acoustic mixing series. And we're going to be talking about M-S EQ.
I've go some picked acoustic guitar, the strum acoustic guitar and now we've covered the
lead vocal. And what I'm going to do is I'm going to use some M/S EQ using the FabFilter
Pro-Q to kind of shape the acoustic better with the vocal to try to try to create some
space for the vocal to have its own frequency realm. And then, realm, there you go, word
of the day. But I'm going to use it to kind of excite the acoustic guitar to give it a
little more shimmer sweetening kind of effect. And we'll jump right into that.
Let me hit play for a short snippet. And then we'll talk about what we have going on with
the MS. "You've been chosen to do great things. You are more than what you've been revealing.
Let it out and let it shine." Okay cool, so we've heard that a couple of times now in
this series. So let's move into what we've got going on. What I want to talk to you guys
about first is how I've got my guitars routed. I've mentioned a couple times now that these
acoustics were recorded for Jeris Cole the artist. The song is called Chosen.
These were recorded for his radio version and they've been layered a specific way. So
it wasn't a plugin acoustic guitar and play from start to finish kind of situation. With
that being said, you've got the picked acoustic guitars albul go to an aux that I'm treating
for, and I've called it ACS pick for acoustic pick. Then I'm sending the strum the guitars
to an aux. And I'm treating them as ACS strum. Well then both of those aux are going to music.
And you can see that here. At the bottom it says all music. Those of you who watch Pensado's
Place or follow him or have seen his ITLs, you know that he uses this same exact system.
He's the man. So, give credit where it's due.
All vocals, all drums, all music, all effects on full production stuff will have a low end,
high end sometimes. And, am I missing anything percussion, it just depends what's going on
in the song. I'll have D set up as a last step before the stereo buss. So here, the
music, those acoustic guitars are being sent to all music. And you can I've got the slate
FG Gray pulled up. And I'm pretty sure this is the SSL buss compressor emulation with
their take on that. And, I guess I can play a little bit of what this is doing.
The Buss compressor here. "You've been chosen to do great things. You are more." Let me
bypass it. And let's solo the acoustics, the strummed acoustics should work. So, here it is
without it. With it, without it. And with it one more time.
Now I know the volume is not even there. But if you can hear it, it's got a little more
sparkle to it. It's a little more clear. And it's got just a nice sound to it. So I'm using
that. And let's get rid of these guys and scroll back down. And then I followed that
up with the FabFilter Pro-Q. And I've got it in M-S mode, so mid side mode. I'm not
as technically sound as maybe Eric Tarr. I know he's got a couple of videos on theproaudiofiles.com
where he's done some great work explaining mid-side, Matthew Weiss as well.
But the very simple fact is that MS EQ'ing is going to give you control over the middle,
so you can EQ the middle different from the way you EQ the sides.
So, what I've done here, if you guys remember in part two, I talked about the lead vocal
and how I EQ'ed the lead vocal. Let me pull that up. This EQ right here, you can see I'm
boosting at around 1300 Hz, 1.3 and then in the acoustic guitars, down here collectively
because I do have picking and strumming playing at the same time. I've decided to remove around
that frequency in the middle content. So the sides are still going to have that frequency
in it. But for the middle, that's in the middle competing with the vocal, I went in and removed
some of that to give the vocal more dominance there. And I'll A/B that in a second. But
I wanted give the guitars a little bit more sparkle. So in the middle, I picked a frequency
just above where I've boosted it in the vocal for the acoustic guitar to live, to kind of
just give it a little bit more of a dominance in that range. And then you'll see here the
sides, I've boosted for some sparkle to kind of give you the impression that it gets brighter
on the sides. Then I've boosted 92 maybe I thought it was a little thin. So I kind of
boosted that up a little bit. And that's on the sides as well. So let's take a listen
and A/B it.
This is more the concept and why I did this was to shape the sounds so that they kind
of fit together rather than getting muddy and being on top of each other. I wanted them
to be together. So let me bypass that. Let's move it out of the way and come up here. Probably
a good section is at the end where he's getting pretty hyped. Let's hear this part. This is
without it.
[music]
Okay, and now I'm going to put it in. But I'm going to start it without it and then
I'm going to engage it half way through.
[music]
That's probably worth soloing but I know you guys are hearing that. Let's go, bypassed. And
then back in. One more time out, back in. Yeah, so back with the vocal, because like
I said, this is to kind of fit them together. If you listen. And one more time without it.
"What you've been revealing. So let it out and let it shine. And look that it's only
a matter of time. And tell them. They know as well as you know." Yeah, I'm really liking
that. So, I've done some M-S EQing. I've got the SPL, I can't remember what the name of
it is but the one from them and a few others. And I've done the buss technique. There's
lots of stuff out there but you can't beat the FabFilter and the flexibility that it
gives. I am using this on every mix. I can almost guarantee you that I'm going to be
using that from now on. So that's kind of fresh for me. And I'm kind of late on bandwagon
But kind of a short one. But I wanted to give you guys an idea of how I'm cleaning that
up. And keep them coming man. You guys are doing awesome with the emails. David[at]DavidGlennRecording.com,
theproaudiofiles.com and hopefully we'll see you on video number four. I am going to cover
the stereo buss. So be excited. I'm going to walk you through what I'm doing and how
I'm doing it. And we'll talk to you then. See you.