Tip:
Highlight text to annotate it
X
Today, we're going to take a quick look at Dexter Axles, Trailer Hub and Drum Assembly,
part number 42866UC3-EZ. This hub and drum assembly has an 8 on 6-1/2 pattern. There
are eight studs around the center of the hub and if we were to measure straight across
from one to the other, we'd get about 6-1/2 inches. It's designed to work with 5200-pound
to 7000-pound axles. Each drum has a capacity of 3500 pounds so when paired with another,
you'd get your 7000-pound capacity. Included, you'll find eight conical lug nuts, a grease
cap with a removable rubber plug. This is so you can access the easy lube fitting
on the end of your spindle. There's also a seal and your inner and outer bearings. Your
inner bearing is 25580 and your outer bearing is 141258. The races are included, but they
are already pressed into place inside the drum. We'll take a look at the back and go
over some interior measurements.