Tip:
Highlight text to annotate it
X
Waste Recovery Systems Pipe Lining
Home Before Liner Installation
Digging up the clean out of the pipe
Removing section of pipe for installation of liner
Televising existing pipe
Old pipe before liner is installed
Cleaning the sewer line by water jetting
Both calibration tube and liner need to be measured
Mixing resin to saturate liner
Evenly saturating the liner with resin by running it through a press
Inserting the saturated liner into the inverter
Installing liner & Calibration tube into host pipe
Inverting new liner
Steam curing pipe liner
Removing calibration tube
Final product, pipe after new line is complete
Home after liner installation