Tip:
Highlight text to annotate it
X
Welcome to Kickstart where you get to see new products here at AutomationDirect.
Today I am going to show you our new High speed input and high speed output cards for
our Productivity3000 programmable controller. Our customers have been anxiously awaiting
the release of these new motion control cards, and now we have them…
The P3-HSI is a high speed 1megahertz input module that offers both differential and single
ended inputs. This module accepts pulse/direction and quadrature signals on each of the 2 independent
input channels. It also provides four general purpose high speed inputs and four general
purpose 5 to 24volt dc half amp outputs. The P3-HS0 is a high speed 1 megahertz output
module that supports pulse/direction, up/down and quadrature pulse output on each of the
two independent output channels. It has both line driver and open drain outputs. Additionally,
it has six general purpose high speed inputs and four general purpose outputs. Simple move,
velocity move, and additional high level instructions make it easy to implement the applications
motion profile. These modules will both require the use of
a Ziplink cable and Ziplink module like this one, or choose from many other available modules.
Both of these modules will only work with our Productivity3000 programmable controllers.
You can find the agency approvals and specs for this DC output module on our website at:
www.automationdirect.com Don’t forget: we sell other Input and output
modules for the Productivity3000 as well as specialty modules like high speed inputs and
output cards. Check back with us often on AutomationDirects
websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching
us on YouTube, please let us know what you think about the products or how you plan to
use them in your application by leaving us a comment down below.
Thanks for watching and we hope to see you again soon.